01
Bare copper
Large Wire Drawing Machine with Continuous Annealing
Rod breakdown from Φ8 mm with in-line annealing at up to 2,100 m/min.
Φ8 → Φ1.2–4.0 mm2,100 m/min13 dies
View series
WIRE DRAWING & ANNEALING SYSTEMS
Precision wire drawing lines, built for continuous production.
From 8 mm copper rod to 0.025 mm ultra-fine wire — drawing, continuous annealing, tinning and pay-off systems engineered in Suzhou, China.
14Machine series
Φ0.025–8.0 mmWire range
2,500 m/minMax line speed
SuzhouManufacturing base
WHAT WE BUILD
One partner for the complete wire drawing line.
Honglang designs and builds drawing, continuous annealing, tinning and wire handling equipment for bare copper, copper-clad aluminium, copper-clad steel and aluminium-magnesium wire. Each line is configured around your incoming rod, finished wire and target output.
- Drawing and annealing in one continuous line
- Gear, chain and flat-belt drive options
- DC three-section annealing control
- Pay-off, tension and take-up matched to the process
EQUIPMENT RANGE
Fourteen series, one continuous process.
Start with the wire you need to make, then select the drawing, annealing and handling modules around it.
03
Bare copper
Gear & Chain Medium Wire Drawing Machines
17-die medium drawing in 1,200–1,800 m/min configurations.
Φ2.5–3.5 → Φ0.4–1.6 mm1,800 m/min17 dies
View series
06
Bare copper
Fine Wire Drawing Machines (High-Speed Series)
24-die high-speed fine drawing for 0.08–0.6 mm wire, up to 2,500 m/min.
Φ0.5–1.6 → Φ0.08–0.6 mm2,500 m/min24 dies
View series
09
Bare copper
Annealing & Tinning Machine
24–40 heads, even furnace temperature and double tin furnace.
Φ0.1–0.32 mm finished300 m/min24–40 heads
View series
10
Copper-clad
Copper-Clad Aluminum Wire Drawing Machines
Six CCA configurations from Φ3.0 mm inlet to Φ0.08 mm outlet.
Φ0.15–3.0 → Φ0.08–1.2 mm2,000 m/minCCA
View series
13
Bare copper
Aluminum-Magnesium Alloy Wire Drawing Machines
30-die alloy drawing at 2,500 m/min with ceramic capstans.
Φ0.5–1.2 → Φ0.1–0.25 mm2,500 m/min30 dies
View series
WHY HONGLANG
Machine-building discipline, line-level thinking.
Japanese technology, local engineering
Our designs draw on Japanese wire drawing technology and are developed by an in-house team of specialists, engineers and technicians.
Quality control at every stage
Mechanical parts and electrical components are checked against strict procedures, with controlled testing before shipment.
Complete line responsibility
Drawing, annealing, tinning, pay-off and take-up are matched as one system rather than separate machines.
Support that answers
Fast, accurate technical support from machine selection through commissioning and spare parts.
APPLICATIONS
Built for the wire you make.
Our lines run in cable, enameled wire, electromagnetic wire, electronic wire, EDM wire and stainless steel production.
Wire & cable
Bare copper and alloy conductors for building wire, power cable and flexible cords.
Learn moreEnameled & magnet wire
Fine and ultra-fine copper wire with stable diameter and surface quality.
Learn moreElectronic & data cable
High-speed fine drawing for conductors used in electronics and data transmission.
Learn moreEDM cutting wire
Dedicated copper and brass drawing lines for electrode wire production.
Learn moreCopper-clad conductors
CCA and CCS drawing and conduit annealing with controlled copper layer integrity.
Learn moreStainless & alloy wire
Aluminium-magnesium and special alloy drawing with ceramic capstans and spray lubrication.
Learn more
14Machine series
0.025mm
THE COMPANY
Engineering in Suzhou, serving wire and cable makers worldwide.
Suzhou Honglang Machinery Electric Co., Ltd. manufactures drawing machines for copper, copper-clad aluminium, copper-clad steel, brass, stainless steel and aluminium-magnesium wire, together with continuous annealing, tinning and take-up equipment.
- Drawing, annealing and tinning know-how
- Mechanical and electrical quality control
- Equipment for 0.025–8.0 mm wire
- Export-ready documentation and support
Tell us your wire. We will configure the line.
Share the incoming rod, finished diameter, material and target output. Our engineers will respond with a recommended machine configuration.