03
Bare copper
Gear & Chain Medium Wire Drawing Machines
17-die medium drawing in 1,200–1,800 m/min configurations.
Φ2.5–3.5 → Φ0.4–1.6 mm1,800 m/min17 dies
View series
04EQUIPMENT SERIES
Medium Wire Drawing Machine with Continuous Annealing
Gear and chain medium drawing with DC three-section annealing, up to 1,500 m/min.
Φ2.5–3.5 → Φ0.4–1.6 mm1,500 m/minDC 3-section annealing
Available models · 04
Overview
The 17DST and 17DT/17MDT integrate 17-die medium drawing with DC three-section annealing. The 17DST reaches 1,500 m/min with a 55 kW main motor and 90 kVA annealing; the chain-drive 17DT/17MDT runs at 1,200 m/min with 72 kVA annealing.
Φ2.5–3.5 → Φ0.4–1.6 mmWire range
1,500 m/minMax speed
DC 3-section annealingConfiguration
TECHNICAL DATA
Full specifications
| Specification | 17DT / 17MDT | 17DST | 250 |
|---|---|---|---|
| Inlet diameter (mm) | Φ2.5–Φ3.5 | ||
| Outlet diameter (mm) | Φ0.4–Φ1.2 | Φ0.4–Φ1.6 | Φ0.4–Φ1.2 |
| Max drawing speed (m/min) | 1,200 | 1,500 | 1,200 |
| Main motor | 45 kW | 55 kW | 37 kW |
| Annealing power | 72 kVA | 90 kVA | 72 kVA |
| Spooler motor | 11 kW | 15 kW | 11 kW |
| Annealing method | DC three-section annealing | ||
| Suitable spool (mm) | Φ630 max | ||
| Revise system | PID synchronous spooler | ||
| Take-up capacity (kg) | 100–400 | ||
| Power source (V) | 380 | ||
| Brake | Pneumatic | ||
| Dimensions L×W×H (mm) | 1,000 × 1,400 × 2,450 | ||
| Weight (kg) | 6,500 | 7,300 | 2,000 |
Swipe horizontally to compare all models.
All values are for standard configurations. Dimensions and power ratings may change with options; please confirm the final datasheet with our engineering team.
AUXILIARY EQUIPMENT
Range & auxiliary equipment
Photos show standard machines. Guards, colors and auxiliary equipment are configured per order.
MORE FROM HONGLANG
Related equipment
05
Bare copper
Medium & Fine Wire Drawing with Continuous Annealing + Preheating
Two-zone thermal control: DC three-section annealing plus preheating.
Φ0.26–3.5 → Φ0.25–1.2 mm1,500 m/minAnnealing + preheating
View series
08
Bare copper
Fine Wire Drawing Machine with Continuous Annealing
In-line DC annealing for 0.08–0.32 mm wire at up to 2,000 m/min.
Φ0.5–1.6 → Φ0.08–0.32 mm2,000 m/minDC 3-section annealing
View series
Tell us your wire. We will configure the line.
Share the incoming rod, finished diameter, material and target output. Our engineers will respond with a recommended machine configuration.